Aluminium Products:
Wash down periodically with gentle detergent soap only (no abrasive cleaner to be used) and then dry. Maintain timber sub-frames with Sadolin Extra, Dulux Weathershield or Sikkens Filter 7 in the colour of your choice. Two or three coats after installation, then one coat every two years.

UPVC Products
White or wood-grain finish, wash down periodically with gentle detergent soap only (no abrasive cleaner to be used) and then dry.

Hardwood Products:
After installation there will be a total of two coats of Sadolin Classic applied to all joinery material. A further two coats of Sadolin Extra, Dulux Weathershield or Sikkens Filter 7 will need to be applied as soon as possible after installation by the customer. A light rub down between coats is required and a wipe down with a cloth soaked in white spirit to remove dust and particles before each coating. The choice of colour is to be decided by the customer.

Note: All finishes to hardwood sub-frames to aluminium products and hardwood products will be rubbed down to a fine finish and coated with sadolin Classic in the factory before installation, and once on site with Sikkens Filter 7 during the installation by the company. After this process there will be a matt appearance, this will not always feel smooth to the touch due to the nature of the hardwood until the top coats have been applied.

Hinges:
All hinges should be lubricated once a year with WD4O to ensure they keep in good working order.